Single row cylindrical roller bearings

Contact Now

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

Bearing Number	Bore Dia	Outer DIa	Width	Size
60 mm x 110 mm x 22 mm SNR NJ212.EG15C4 Single row cylindrical roller bearings	3 mm	5.5 Nm	100 °C	4.78 kN
60 mm x 110 mm x 22 mm SNR NJ.212.E.G15 Single row cylindrical roller bearings	5.5 Nm	32.4 mm	41.5 mm	17 mm
60 mm x 110 mm x 22 mm NTN NJ212EG1 Single row cylindrical roller bearings	Bearings with Housin	Deep Groove Ball Bea	[Aluminum Alloy] 201	No
60 mm x 110 mm x 22 mm NTN NJ212C4 Single row cylindrical roller bearings	9.5 mm	51.1 mm	ES207-23G2T20	25.7 kN
60 mm x 110 mm x 22 mm NTN NJ212C3 Single row cylindrical roller bearings	FC203N-	12mm	SCC203	46 mm
60 mm x 110 mm x 22 mm NTN NJ212EAT2X Single row cylindrical roller bearings	20 ～ 40	8 Days	No	DD (Contact Rubber S
60 mm x 110 mm x 22 mm NTN NJ212 Single row cylindrical roller bearings	95.3 mm	45 mm	8.3 Nm	30.2 mm
30 mm x 90 mm x 23 mm NTN N406 Single row cylindrical roller bearings	6804	Yes (with retaining	20	Deep Groove Ball Bea