
- NTN-SNR BEARING RULMENTI S.R.L.
- Deep groove ball bearings Double row spherical roller bearings Plain bearings,Bushings
- AddressZona Industriala-West, 6 Strada Salzburg, 21470 SIBIU, Romania
- Phone(Working Time)321-837-7374
SAF and SAW pillow blocks with bearings on an adapter sleeve
Contact NowThe new generation of SAF split pillow block housings has been completely redesigned to deliver maximum benefits to the user, while maintaining mounting dimensions that ensure interchangeability with previous versions, compatibility with other manufacturers’ products, and adherence to industry standards. Advantages The most important advantages of the newly developed pillow block housings SAF can be summarized as follows: The housing has higher strength due to the improved housing design, developed using modern calculation methods. This gives higher security against failure of the housing due to overload. The housing material can be selected in accordance with the requirements of the application, always giving the most economical solution. Stockholding is simplified with the ordering of housings in a universal design, since the housing delivery includes standard seals, locating ring, endcover and grease fitting. They are suitable for spherical roller bearings 222..-K as well as for split spherical roller bearings 222S. Due to the range of seal variants, the correct seal can be selected taking account of the environmental conditions. Marks indicating the center of the housing as well as machined locating faces allow rapid and precise alignment of the housing. Several predefined mounting points give easier mounting of sensors for condition monitoring and connection of the lubricant supply to the housing. Serial numbers marked on the housing cap and base ensure that the upper and lower housing sections are correctly matched during assembly
skf SSAFS 23028 KAT x 4.7/8 SAF and SAW pillow blocks with bearings on an adapter sleeve
Two Shields | 100.000 mm |
34.00 mm | 3400 rpm |
skf SSAFS 22528 x 4.13/16 T SAF and SAW pillow blocks with bearings on an adapter sleeve
1.00 mm | 165000 N |
4300 rpm | 140.0000 mm |
skf FSAF 1613 x 2.1/8 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
368.160 kN | 460 mm |
146 mm | 4470 kN |
skf SAF 22622 x 3.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve
787.4 mm | 1079.602 mm |
787.4 mm | 4300 kN |
skf SAF 22544 x 7.1/2 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
17 mm | 1200 r/min |
0.475 kN | Cast iron |
skf SAFS 22524 x 4.1/8 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
15.088 mm | 59.944 mm |
80.289 mm | W 12 |
skf SAW 23540 x 7.1/4 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
1232 mm | 515 mm |
320 r/min | 1.8 |
skf SSAFS 22518 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
0.015 | 8 mm |
5.75 mm | 0.174 kN |
skf SAW 23518 x 3.1/8 SAF and SAW pillow blocks with bearings on an adapter sleeve
25.4 mm | 29 mm |
44 mm | 0.5 in |
skf SAW 23518 x 3.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve
87026 | - |
87000 Shield & Seal | 15.9 mm |
skf FSAF 22518 x 3.1/16 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
2 x B10724-102 | 70.104 mm |
222.25 mm | 295.275 mm |
skf FSAF 1517 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve
585 kN | 0.33 |
3.3 mm | 185.738 mm |